Gambro Cobe Spectra, Essentials Manual

Page: 83 / 245

Software Options and Configuration
COBE
®
Spectra™ Apheresis System • Essentials Guide 5-9
Change Donor Information
To change the entered donor or patient data, press 2 . One of the
following screens appears:
All procedures except AutoPBSC (Spectra version 6.1):
AutoPBSC only (Spectra version 6.1):
Press the number of the value you want to change. A data entry screen
appears with the previously entered value in brackets.
To select the value(s) you entered previously, press ENTER .
– or –
Change the entry, then press ENTER .
Run Results
To display the run results screen, press 3 . The screen that appears differs
from procedure to procedure.
The target end results screen appears except in TPE, RBCX, and BMP
procedures. The screens that appear for TPE, RBCX, and BMP
procedures are as follows:
TPE procedures:
The TPE run results screen appears:
•
To change the replacement fluid, press 1 .
•
To change the fluid balance, press 2 .
•
To display the target end results, press 3 .
RBCX procedures:
The RBCX run results screen appears:
•
To change the average hematocrit for the replacement fluid, press 1 .
•
To display the target end results, press 2 .
BMP procedures:
The BMP run results screen appears. For information, see “Changing
the Bone Marrow Data or Reviewing Run Results” in Chapter 5 of the
Cell Therapy Guide .
Change: 1=Sex, 2=Height, 3=Weight,
4=HCT, 5=Platelet, 6=TBV.
Change: 1=Sex, 2=Height, 3=Weight,
4=HCT, 5=WBCs, 6=%MNCs 7=TBV.
Change: 1=Replacement fluid, 2=Fluid
balance, 3=End results.
Change: 1=Average replacement fluid
hematocrit, 2=End results.