Gambro Cobe Spectra, Essentials Manual

Page: 69 / 245

Loading and Removing the Disposable Tubing Set and Other Common Operations
COBE
®
Spectra™ Apheresis System • Essentials Guide 4-13
2
Dual-Needle procedures: Close the pinch clamp on the access line.
Single-Needle procedures: Close the pinch clamp on the access line
between the “Y” manifold and the access manifold.
3
Open the roller clamp on the access saline line.
4
Press CONTINUE .
5
ELP procedures : The following screen appears:
The Spectra system continues to collect platelets until one of the
following events occurs:
• The CCM detects that the concentration is too low to collect
• A spillover occurs
• The system processes 50 mL of inlet volume
The Spectra system skips continued platelet collection if the collect
valve is in the return position (during a spillover, for example) or if
the centrifuge stops before Rinseback mode.
LRS and LRST procedures : The Spectra system monitors the
procedure for events that might cause WBC contamination. If none
of these events occur during the procedure, one of the following
screens appears:
The Spectra version 5.1 screen:
Note: If you do not end the Run when the End of Run
screen appears, the pumps and centrifuge stop after
10 minutes. “PAUSED” appears in the lower right-hand
corner of the screen:
The Spectra system delays the start of Rinseback to ensure
an adequate pressure drop in the system. To continue the
procedure, press
CONTINUE :
Warning: DO NOT disconnect the needle in a Single-
Needle procedure until the Rinseback operation is complete.
Clamp access. Open access saline.
Please wait.
PAUSED
Clamp access. Open access saline.
Press Continue to Rinseback
Rinseback: Collecting
Rinse.
Label LRS product as
<10E6 WBC content.
Press CLEAR