manualshive.com logo in svg

Gambro Cobe Spectra, Essentials Manual

The Gambro Cobe Spectra Essentials Manual is a comprehensive guide for users of this innovative medical device. This manual is available for free download on our website, ensuring easy access to vital product information. Explore the functionality and operation of the Gambro Cobe Spectra with this essential manual today.

Share
Download
background image

Introduction

COBE

®

Spectra™ Apheresis System • 

Essentials Guide

2-21

Disposable Tubing Sets

Spectra system disposable tubing sets include a preconnected separation 
channel and tubing, and are easy to install. An illustration of each set is 
available on the Gambro BCT website, www.gambrobct.com, or from a 
Gambro BCT representative.

Dual-Needle Extended Life Platelet (ELP) disposable tubing set

: 

Functionally closed disposable tubing set used for a Dual-Needle ELP 
procedure to collect platelets for extended storage, or used to perform a 
Platelet Depletion procedure. You can concurrently collect plasma with 
platelets during an ELP procedure.

Single-Needle Extended Life Platelet (ELP) disposable tubing set

: 

Functionally closed disposable tubing set used for a Single-Needle ELP 
procedure to collect platelets for extended storage. You can concurrently 
collect plasma with platelets during an ELP procedure.

Dual-Needle Extended Life Platelet (ELP) disposable tubing set with 
LRS Chamber

: Functionally closed disposable tubing set used for a 

Dual-Needle LRS or LRST procedure to collect leukoreduced platelets 
for extended storage, or used to perform a Platelet Depletion procedure. 
You can concurrently collect plasma with platelets during an ELP LRS or 
LRST procedure.

Single-Needle Extended Life Platelet (ELP) disposable tubing set with 
LRS Chamber

: Functionally closed disposable tubing set used for a 

Single-Needle LRS or LRST procedure to collect leukoreduced platelets 
for extended storage. You can concurrently collect plasma with platelets 
during an ELP LRS or LRST procedure. 

AutoPBSC disposable tubing set

: Functionally closed disposable tubing 

set used to collect mononuclear cells, including peripheral blood stem 
cells. You can concurrently collect plasma during these procedures.

Therapeutic Plasma Exchange (TPE) disposable tubing set

: Disposable 

tubing set used for a Dual-Needle TPE procedure to remove plasma 
from a patient, or when used with the Single-Needle Set (see below), for 
a Single-Needle TPE procedure.

Single-Needle disposable tubing set

: Set used to convert a Dual-Needle 

TPE procedure to a Single-Needle TPE procedure.

Red Blood Cell Exchange (RBCX) disposable tubing set

: Set used for 

an RBCX or RBC depletion procedure to remove RBCs from a patient.

White Blood Cell (WBC) disposable tubing set

: Set used for an MNC, 

PMN, BMP, WBC Depletion or LPE procedure to remove WBCs from 
a donor or patient, process bone marrow, or perform lymphoplasma 
exchange.

Functionally Closed White Blood Cell (WBC) disposable tubing set

: 

Functionally closed disposable tubing set used for an MNC, PMN, 
BMP, WBC Depletion, or LPE procedure to remove WBCs from a 
donor or patient, process bone marrow, or perform lymphoplasma 
exchange.

Bone Marrow Processing (BMP) disposable tubing set

: Set used with 

the WBC disposable tubing set for a BMP procedure to remove 
mononuclear cells from a bone marrow product.

Accessory platelet storage bag

: Accessory bag used to store platelets. 

This bag is identical to the platelet storage bag on an ELP disposable 
tubing set.

Summary of Contents for Cobe Spectra






















































































































































































































































Reviews:

No comments

Related manuals for Cobe Spectra

Panasonic DVCPRO P2 Series Brochure & Specs preview
DVCPRO P2 Series
Brand: Panasonic Pages: 32
FEAS 3850 User Manual preview
3850
Brand: FEAS Pages: 72
Hanna Instruments HI 98311 Instruction Manual preview
HI 98311
Brand: Hanna Instruments Pages: 2
Hanna Instruments HI981520 Quick Reference Manual preview
HI981520
Brand: Hanna Instruments Pages: 2
Hanna HALO 2 Instruction Manual preview
HALO 2
Brand: Hanna Pages: 12
Hanil T04 User Manual preview
T04
Brand: Hanil Pages: 24
Hanil Supra R17 User Manual preview
Supra R17
Brand: Hanil Pages: 32
Hanil Component R12 Operation Manual preview
Component R12
Brand: Hanil Pages: 24
JBSYSTEMS Light SE100 Operation Manual preview
SE100
Brand: JBSYSTEMS Light Pages: 17
Zero88 Frog Operating Manual preview
Frog
Brand: Zero88 Pages: 26
Össur CHEETAH KNEE Instructions For Use Manual preview
CHEETAH KNEE
Brand: Össur Pages: 98
Össur Flex Foot Cheetah Instructions For Use Manual preview
Flex Foot Cheetah
Brand: Össur Pages: 107
Össur CHEETAH JUNIOR Instructions For Use Manual preview
CHEETAH JUNIOR
Brand: Össur Pages: 38
Össur C180 ROCKET Instructions For Use Manual preview
C180 ROCKET
Brand: Össur Pages: 39
Össur Bionic Symbionic Leg Quick Reference Card preview
Bionic Symbionic Leg
Brand: Össur Pages: 2
Össur MAUCH KNEE Instructions For Use Manual preview
MAUCH KNEE
Brand: Össur Pages: 67
Össur AirForm Series Instructions For Use Manual preview
AirForm Series
Brand: Össur Pages: 17
Össur PROPRIO FOOT W Instructions For Use Manual preview
PROPRIO FOOT W
Brand: Össur Pages: 82

Brands by name

Popular brands

Load more brands