10
6:5 Combining elements of other Grooves
You can combine elements of any Groove in the Palette with the currently selected Groove.
Firstly, select the destination Groove for editing.
Then expand the relevant source Groove in the Palette so that its kit-piece components are showing. Make sure you click on the
expand/collapse button to expand the source Groove – clicking anywhere else in the slot results in the Groove replacing the cur-
rent selection and being shown in the Editor.
You can audition elements by clicking their preview buttons – this is done without changing the currently selected Groove.
Replacing elements
To replace the events for any kit-piece in the current Groove (destination) with a kit-piece element from the source Groove, drag
and drop the expanded kit-piece element from the source Groove to the desired location in the grid.
Merging elements
To merge the events for any kit-piece in the current Groove (destination) with a kit-piece element from the source Groove, drag
and drop the expanded kit-piece element from the source Groove to the desired location in the grid, while holding down the ALT
key.
Expand a Groove to show its elements, which can
be dragged across to the currently edited Groove
