Fukuda Denshi DynaScope 7000 Series, Service Manual

Page: 110 / 143

Storage
This section describes about storing the equipment and recording paper.
Storing the Device
Store in a place where the device will not be exposed to splashing water.
Store in a place where the device will not be adversely affected by atmospheric pressure,
temperature, humidity, ventilation, sunlight, dust or atmosphere containing salt or sulfur.
Store in a level area where the device is not exposed to vibration and shock (including during
transportation).
The following environmental conditions should be observed when storing the device.
Storage Temperature : –10–60
°
C
–5–50 ° C (with MGU-701/702)
Storage Humidity : 10–95% (at 60
°
C)
15–90% (at 50 ° C) (with MGU-701/702)
Storing the Recording Paper
This device utilizes heat sensitive recording paper. If placed in a high temperature for long period
of time, the print may become indistinct, and unable to read. When storing, follow the precautions
below.
Store in a place where light is non-existent and avoid direct sunlight.
Do not leave the paper in high temperature (50°C/122°F or above).
Do not store the paper in polyvinyl chloride bag.
Do not expose the paper to alcohol, hydrochloric acid, or ester ketone.
Avoid using adhesive agents other than water-based glue.
About Handling the Display Panel
The display panel utilizes exclusive fluorescent light for the backlight.
As this fluorescent light tube has a product life cycle, it needs to be replaced periodically.
The product life cycle of the fluorescent light tube is about 50,000 hours.
Although the LCD utilizes highly accurate picture elements, occasionally, there may be a few
pixels, which does not light, or constantly lights up. Please note that this is not an equipment
failure, and will not affect the monitoring operation.
7
－
18