Fukuda Denshi DynaScope 7000 Series, Service Manual

Page: 102 / 143

●
Recorder Adjustment
1) Paper Out Sensor and Mark Sensor Adjustment
1 Take out the paper from the recorder cassette.
→ Check that “No” is displayed.
2 Set the cassette.
→ Check that “Yes” is displayed.
3 Press the Paper Out Sensor Adjustment
→
Start key.
→ Check that “Adjustment was completed.” is displayed.
Check that “No” is displayed for “Rec.Paper” under the recorder status.
4 Install the recording paper inside the recorder cassette, and set the cassette.
→ Check that “Yes” is displayed for “Rec.Paper” under the recorder status.
5 Press the Mark Sensor Adjust
→
Start key.
→ Check that “Adjustment was completed.” is displayed.
→ Check that “Yes/No” is displayed for “Mark” during paper feeding.
Judgment Criteria
Cassette Sensor Cassette status should be correctly displayed.
Paper Sensor Paper out status should be correctly displayed.
Paper Out Sensor
Adjustment Should be correctly adjusted, and “Adjustment was
completed.” should be displayed.
Mark Sensor
Adjustment Should be correctly adjusted, and “Adjustment was
completed.” should be displayed.
Mark Sensor Mark sensor should be correctly displayed.
7
－
10