Fukuda Denshi DynaScope 7000 Series, Service Manual

Page: 128 / 143

● Periodic Check Item
The periodic check items are as follows.
No. Check Item
1 External Appearance
2 Power Supply Part
3 Display / Control / Record
4 ECG
5 Respiration
6 Temperature
7 Non-invasive
Blood Pressure
8 Arterial Oxygen Saturation (SpO
2
)
9 Invasive Blood Pressure
10 Cardiac Output (CO)
11 Oxygen Gas Concentration (O
2
)
12 External Output (Analog Output)
13 Calibration
14 Electrical
Safety
●
Periodic Check Procedure
C A U T I O N
Before the check procedure, back up the setup data, patient data, etc. on a
CF card.
No. Check Item Check Procedure Criteria
1. External Appearance, Accessories
01 Appearance Visually check the exterior for
scratches, cracks, deformation, and
rust. No abnormality should be
found.
02 Cables Visually check all cables for any
damage or being disconnected. No damage should be found.
03 Recording Paper Visually check the installed paper
condition. There should be no damage,
discoloration of the paper.
04 Operation Manual Check if operation manual and
other accompanying documents
are stored in a specified place. Should be stored in a specified
place.
7
－
36