Fukuda Denshi DynaScope 7000 Series, Service Manual

Page: 18 / 143

Precautions about Connections to Peripheral Devices
In the interest of safe and sufficient performance of this equipment, the connection of other
manufacturers’ equipment to the monitor is not authorized, unless the connection is explicitly
approved by Fukuda Denshi. It is the user’s responsibility to contact Fukuda Denshi to determine
the compatibility and warranty status of any connection made to another manufacturer’s equipment.
W A R N I N G
For the connector with mark, only the peripheral devices specified by
Fukuda Denshi should be connected with the given procedure. Use of an
unspecified device may cause electric shock to the patient and/or operator due
to excessive leakage current.
C A U T I O N
All the peripheral device connectors on the DS-7000 are isolated from the
power supply, but the peripheral devices are not isolated. To prevent danger of
electric shock, always position the peripheral devices away from the patient.
When connecting peripheral devices to DS-7000, it is the user’s responsibility to verify that the
overall system complies with IEC 60601-1-1, “Collateral Standard: Safety Requirements for
Medical Electrical Systems”.
Precautions about the Fuse
D A N G E R
If the fuse blows, do not continue using it as internal damage to the equipment
may be considered.
Accessories and Optional Accessories
W A R N I N G
Use only the cables specified by Fukuda Denshi.
Use of other cables may result in increase in emission or decrease in
immunity.
xiv