Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 71

Page: 71 / 285

PRIMERGY RX100 S4 User’s Guide

allation

sing ServerS

Click [Start now].

Clicking [Start now] deletes all disk contents and starts installation. Click [Stop] when you do
not perform installation.

After 10 seconds, installation starts automatically.

1. When RAID has been configured, the system restarts.

2. If a message prompts you to insert the Array Controller Document & Tool CD, insert

the CD-ROM and click [OK].

3. If a message prompts you to insert the Document & Tool CD, insert the PRIMERGY

Document & Tool CD and click [OK].

4. If a message prompts you to insert the Service Pack CD-ROM, insert the CD-ROM

and click [OK].

5. For Windows Server 2003 x64, a message prompts you to insert the ServerStart

Disc 2 and restart the system. Insert the ServerStart Disc 2 and restart the system.

When a message prompts you to insert the OS CD-ROM, insert the CD-ROM

and click [OK].

For Windows 2000 Server/Windows Server 2003/Windows Server 2003 x64

1. Insert the OS CD-ROM (Installation CD-ROM).

The License Agreement window appears.

2. Click [I agree].

After files are copied, a message prompts you to eject the CD-ROM and floppy disk.

For Windows Server 2003 R2/Windows Server 2003 R2 x64

1. Insert the OS CD-ROM (Installation CD-ROM) Disc 1.

The License Agreement window appears.

2. Click [I agree].

After files are copied, a message prompts you to insert the Disc 2.

3. Eject the Disc 1 and insert the Disc 2.

After files are copied, a message prompts you to eject the CD-ROM and floppy disk.

Eject the CD-ROM and floppy disk and click [OK].

Then the system is restarted.

The system continues the installation operation after restart.

OS GUI setup, LAN utility installation, Service Pack installation, and Active Directory

installation are performed automatically.

When a confirmation message to restart appears, click [Restart].

The system restarts and installs high reliability tools.

When a message on installation completion appears, press any key.

Restart the system.

Click [Start]

→

[Shutdown]. Select [Restart] and click [OK].

The system restarts.

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands