Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 102

Page: 102 / 285

102

Chapter 3 OS Installation Using ServerStart

Checking Remote Resources

Check that the remote resource server is shared properly.

Start up "Command Prompt" on the remote resource server. Enter the following

and press the [Enter] key.

prompt:>net share

Check that the created shared folder is displayed properly.

For the net command, refer to Windows Help.

Starting Installation

Start installation from the target server.

When using the ServerStart floppy disk, confirm the floppy disk drive of USB connection is connected

before turning on the power supply of the server.

In Guided Mode/Expert Mode

Turn on the server and insert the ServerStart Disc 1 CD-ROM immediately.

ServerStart starts up and a message prompts you to insert the ServerStart floppy disk.

Create a ServerStart floppy disk.

When the ServerStart floppy disk supplied with the server is used

1. Insert the ServerStart floppy disk supplied with the server. Make sure that

"Removable media" and "A:" are selected and click [Create].

The network startup setting window for remote installation appears.

2. Click [OK].

The [Initialization of ServerStart core running] window appears and the ServerStart

initialization process starts. Depending on the hardware configuration, this process may

take a few minutes. When the process is completed, the [Create a ServerStart Floppy Disk]

window appears.

3. Click [Build a ServerStart Floppy Disk].

Creation of a ServerStart floppy disk starts. When the creation is completed, the "Floppy

disk has been created." message appears.

When the remote floppy is used

1. Select "Remote (media)" and click [OK].

The [Network Startup Setting] window for remote installation appears.

If the SCSI option device is installed and a message prompts you to insert the ServerStart
floppy disk, “Removable media“ is selected. Make sure to select “Remote (media)“.

2. Click [OK].

The [Specify Drive] window appears.

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands