223
PRIMERGY RX100 S4 User’s Guide
8
Co
nf
igurin
g Hardwa
re and Utili
tie
s
8.2.12 Server Menu
The [Server] menu sets the server options.
table: Items on the Server Menu
Item
Setting
Description
O/S Boot Timeout
• Disabled (At the time of
purchase)
• Enabled
Sets to enable the OS Boot Monitoring function or
not, when ServerView is installed to the OS. When
this function is enabled, if for some reason booting
the operating system is interrupted, the system will
automatically restart.
The OS Boot Monitoring function can also be
enabled or disabled from ServerView.
Note:
If ServerView is not installed to the OS, make
sure to set the item to [Disabled]. If the setting
is [Enabled], the server may automatically turn
off or restart improperly.
Even when ServerView is installed to the OS,
if starting the system while the ServerStart
CD-ROM or DOS floppy disk is inside, make
sure to disable the OS Boot Monitoring
function. If the system is started with this
function enabled, the server may
automatically turn off or restart improperly.
When setting this function, refer to
"ServerView User’s Guide" to fully learn about
its specifications and operation methods, in
order to use it properly with the correct
settings.
Action
• Continue
• Reset (At the time of
purchase)
• Power Cycle
Sets the operation when the OS did not boot
successfully within the time set with the [Timeout
Value] setting.
Item Specific Help
Change Values
Enter
F10
Select Item
Select Menu
Select Sub-Menu
-/+
F1
Esc
Help
Exit
F9
Setup Defaults
Save and Exit
Advanced
Security
Server
Exit
Main
O/S Boot Timeout:
Action:
Timeout Value:
ASR&R Boot Delay:
Power Cycle Delay:
Boot Retry Counter:
Diagnostic System:
Temperature Monitoring:
CPU Status
Memory Status
Console Redirection
[Disabled]
[Reset]
[0]
[2]
[7]
[3]
[Disabled]
[Disabled]
