manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Share
Download
Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 119

119

PRIMERGY RX100 S4 User’s Guide    

4

Manu

al O

S

 In

st

allation

2. When the "Please insert the disk labeled Manufacturer-supplied hardware support 

disk into Drive A:" message appears, press the [Enter] key.

The following message appears.

3. Select the following, and press the [Enter] key.

4. When the following message appears, press the [S] key.

5. Follow the instructions in the window to perform installation

The message which prompts you to insert the floppy disk appears during the installation, 

insert the driver disk and press the [Enter] key.

6

Follow the instructions from the setup program to continue the installation 

procedure.

If a message indicating that the driver has not passed Windows Logo testing to verify its 

compatibility with Windows appears, select [Yes] to continue the installation procedure.

7

Install the ChipSet driver.

1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.

If the ServerStart window appears, exit ServerStart.

2. Execute the following command on the ServerStart CD-ROM.

[CD-ROM drive] :\DRIVERS\ChipSet\Intel\Intel3000\Setup.exe

The installation wizard starts up.

3. Click [Next]. Follow the instructions in the window to perform installation.

4. When the "InstallShieled(R)

 

wizard has completed" message appears, eject the 

ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the 

system.

8

Install the LAN driver.

Install the LAN driver using the driver disk created from the ServerStart Disc 1 CD-ROM. For 

more details, refer to "4.3 Installing the LAN Driver" (

pg.125).

9

Install the LAN driver advanced setup tool.

For information about onboard LAN driver advanced setup tool, refer to "5.6.1 BACS 

Installation" (

pg.160). For information about LAN card advanced setup tool, refer to "5.7.1 

Intel® PROSet Installation" (

pg.165).

10

Install the display driver.

You have chosen to configure a SCSI Adapter for use with 

Windows, using a device support disk provided by an 

adapter manufacturer.

 

Select the SCSI Adapter you want from the following list, 

or press ESC to return to the 

 

previous screen.

LSI Logic Fusion-MPT SAS Driver (Server 2003 32-bit)

The driver you provided seems to be newer than the Windows 

default driver.

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands