Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 106

Page: 106 / 285

106

Chapter 3 OS Installation Using ServerStart

3.5.2 Installation in Guided Mode

Edit the configuration file and perform installation in guided mode.

Confirm that the floppy disk drive of USB connection is connected before turning on the power supply

of the server.

Turn on the server and insert the ServerStart Disc 1 CD-ROM immediately.

ServerStart starts up and a message prompts you to insert the ServerStart floppy disk.

Insert the ServerStart floppy disk copied in the preparatory procedure into the

floppy disk drive and click [Create].

The network setting window for remote installation appears.

Click [OK].

The [Initialization of ServerStart core running] window appears and the ServerStart initialization

process starts. Depending on the hardware configuration, this process may take a few minutes.

When the process is completed, the [Create a ServerStart Floppy Disk] window appears.

Click [or insert a Server Start Floppy Disk to Start Server Start].

The [Welcome to ServerStart] window appears.

Click [Click here to prepare and/or initiate an operation system installation].

The [Select the operating system to be installed] window appears.

Click [MS Windows Operating Systems].

The [Microsoft Windows Operating System Installation] window appears.

Click the OS to install.

Click [Prepare & initiate an unattended installation of (OS)].

The guided mode starts.

Click [Start here to create a complete configuration file].

The [Open ServerStart Configuration File] window appears.

Specify "SerStartBatch.ini" on drive A and click [Create].

The display returns to the guided mode window.

For procedures from setting wizards to completion of installation, refer to "3.1 Guided Mode"

(

pg.56).

When performing remote installation, refer to "3.4 Remote Installation" (

pg.86).

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands