Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 14

Page: 14 / 285

Chapter 1 Overview

1.1 RX100 S4

This server has the following features.

■

High Reliability

●

Disk Array System Configuration

A disk array system (RAID1) can be configured using the onboard SAS controller.

●

Redundancy Function

By configuring the disk array system, when the hard disk unit has failed, replacing the hard disk and

performing recovery operation is possible for the internal hard disk unit without turning off the power

source of the server and the peripheral devices (hot pluggable).

●

Hardware and Software Designed for Data Security

The locks on the rack and security (password) setting in the BIOS Setup Utility protect hardware and

data assets in the server against theft, ensuring data security with high reliability.

●

Proactive Fan Function

When a fan fails or the ambient temperature rises, the system fan speed is increased automatically to

avoid increase in temperature in the server, ensuring stable server operation.

●

High Reliability Tools

High reliability tools offer stable system operation. For information about high reliability tools, refer to

"1.2.2 High Reliability Tools" (

pg.20).

■

High-speed Processing

●

Intel

Xeon

Processor/Intel

Pentium

D Processor/Intel

Celeron

Processor are installed

One of the following items is installed; high speed data processing Intel

Xeon

Processor, Intel

Pentium

D Processor, or Intel

Celeron

D Processor.

Intel

Xeon

Processor and Intel

Pentium

D Processor are dual core processor, and dual core works

physically as two CPUs.

●

PCI-Express and PCI-X

A PCI-X bus with a maximum data transmission speed of 533MB/sec is installed in this server enabling

high-speed data transmission.

Furthermore, a PCI Slot Conversion kit (optional) has PCI-Express bus with a maximum data

transmission speed of 2.5GB/sec and PCI-X bus with a maximum data transmission speed of 800MB/

sec, enabling high-speed data transmission.

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands