Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 17

Page: 17 / 285

PRIMERGY RX100 S4 User’s Guide

Overview

●

Supporting OS

Using ServerStart V6.609, the following OSs can be installed.

• Microsoft

Windows Server

2003, Standard Edition

• Microsoft

Windows Server

2003, Enterprise Edition

• Microsoft

Windows Server

2003, Standard x64 Edition

• Microsoft

Windows Server

2003, Enterprise x64 Edition

• Microsoft

Windows Server

2003 R2, Standard Edition

• Microsoft

Windows Server

2003 R2, Enterprise Edition

• Microsoft

Windows Server

2003 R2, Standard x64 Edition

• Microsoft

Windows Server

2003 R2, Enterprise x64 Edition

• Microsoft

Windows

2000 Server, SP4 already applied.

• Microsoft

Windows

2000 Advanced Server, SP4 already applied.

ServerStart does not support to install Linux.

The OS which is not supported by the server cannot be installed.

●

Configuration File (SerStartBatch.ini)

A configuration file stores the server setup information configured in ServerStart. To create a

configuration file, use the ServerStart floppy disk supplied with this server. Store only one file on each

floppy disk. Do not set the ServerStart floppy disk to the write-protected state.

You can use any name for the configuration file. However, the file must be installed in the server as

"SerStartBatch.ini". When installing the configuration file, make sure to save it as "SerStartBatch.ini" on

the ServerStart floppy disk.

Start up ServerStart, insert the ServerStart floppy disk containing "SerStartBatch.ini", and click [Start] to

install the server.

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands