Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 21

Page: 21 / 285

PRIMERGY RX100 S4 User’s Guide

Overview

●

Broadcom Advanced Control Suite (BACS)

BACS is a tool for setting details on the onboard LAN when it is used to setup a VLAN.

●

Intel

PROSet

Intel

PROSet is a tool for setting details on the LAN card when using the Teaming function or when

configuring a VLAN.

1.2.3 Installing High Reliability Tools

You can install all high reliability tools provided with PRIMERGY by specifying them in "Application

Wizard" when the OS is installed with ServerStart.

The following high reliability tools are installed.

A: Installed in any case.
N: Installed if selected. Not selected by default.
S: Installed if selected. Selected by default.

Linux does not support batch installation with ServerStart.

ServerView must be configured after installation even when the high reliability tools have been

installed at once with ServerStart. Refer to "Chapter 6 High Reliability Tools" (

pg.169).

When using ServerStart to install the OS, RAID Management Tool and ServerView are installed at a

time. These cannot be selected individually.

To use all functions of ServerView, "Java2 Runtime Environment Standard Edition" and "Web server"

are required. When using ServerStart to install a OS, "Java2 Runtime Environment Standard Edition"

is installed automatically. For Web servers, you can use either of the followings by selecting from the

menu.

• ServerView (for apache)

Install ServerView Web-Server (Web server for ServerView, Apache for Win32 base) and install

ServerView, and install ServerView using it.

table: High reliability tool installation

High reliability tools

ServerStart new installation

Guided mode

Expert mode

RAID Management Tool/ServerView
(for apache)

RAID Management Tool/ServerView

(for IIS)

DSNAP

Broadcom Advanced Control Suite
(BACS)

Intel

PROSet

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands