manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Share
Download
Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 40

40

Chapter 2  Checking before OS Installation

2.1 Preparation on the Server

Before starting installation, install internal options to the server and perform 

necessary hardware settings.

2.1.1 Installing Internal Options

Internal options are classified into those that must be installed before the OS installation and those that 

must be installed after the OS installation.

 

For installation procedures, refer to "Chapter 7 Installing Internal Options" (

pg.175).

Options That Must be Installed before the OS Installation

• Memory modules

• Expansion cards

• USB floppy disk drive

ServerStart floppy disk or driver disk is used to install the OS. Connect the USB floppy disk                
drive in advance.

Options That Must be Installed after the OS Installation

• Optional SCSI devices

• Internal hard disk units where the OS is not installed 

If an internal option device that must be installed after the OS installation has been already installed, 

remove the device, install the OS, and then reinstall the device.

Installing Optional External Devices

When installing external hard disk drives and/or USB devices (except for the USB floppy disk drive), 

turn off their power or unplug their connection cables from the server during the OS installation. 

Connect them after the OS installation.

Cautions for Installing an Expansion Card

When using an expansion card, read the notes on the expansion card.

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands