manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Share
Download
Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 120

120

Chapter 4  Manual OS Installation

1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.

If the ServerStart window appears, exit ServerStart.

2. Execute the following command on the CD-ROM.

[CD-ROM drive] :\DRIVERS\VIDEO\MATROX\w2k_w2k3\setup.bat

The installation wizard starts up.

3. Click [Next]. Follow the instructions in the window to perform installation.

4. When the installation is completed, eject the ServerStart CD-ROM from the CD-

ROM drive and click [Finish] to restart the system.

11

Apply Windows Server 2003 Service Pack.

For details, refer to the description in the window.

 

When applying Service Pack, the driver may be replaced with the one in the Service Pack. For 

details, refer to each manual supplied with the hardware unit.

12

Install high reliability tools.

To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" (

pg.169) and 

install high reliability tools. For array type, RAID Management Tool (ServerView RAID) is 

installed at the same time. When installing RAID Management Tool manually, refer to

 

"6.1.1 

Installing RAID Management Tool" (

pg.170).

The installation of Windows Server 2003 has completed.

Before Starting Operation

After OS installation, refer to "Chapter 5 Operations after OS Installation" (

pg.133) and perform the 

necessary procedures.

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands