manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Share
Download
Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 122

122

Chapter 4  Manual OS Installation

2. When the "Please insert the disk labeled Manufacturer-supplied hardware support 

disk into Drive A:" message appears, press the [Enter] key.

The following message appears.

3. Select the following, and press the [Enter] key.

4. When the following message appears, press the [S] key.

5. Follow the instructions in the window to perform installation

The message which prompts you to insert the floppy disk appears during the installation, 

insert the driver disk and press the [Enter] key.

6

Follow the instructions from the setup program to continue the installation 

procedures.

Cautions on Restarting

In the course of installation, a message appears to indicate that the setup program restarts.              
Wait until it restarts automatically.

7

Install the ChipSet driver.

1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.

If the ServerStart window appears, exit ServerStart.

2. Execute the following command on the ServerStart CD-ROM.

[CD-ROM drive] :\DRIVERS\ChipSet\Intel\Intel3000\Setup.exe

The installation wizard starts up.

3. Click [Next]. Follow the instructions in the window to perform installation.

4. When the "InstallShieled(R) wizard has completed" message appears, eject the 

ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the 

system.

8

Install the LAN driver.

Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more 

details, refer to "4.3 Installing the LAN Driver" (

pg.125).

9

Install the LAN driver advanced setup tool.

For information about onboard LAN driver advanced setup tool, refer to "5.6.1 BACS 

Installation" (

pg.160). For information about LAN card advanced setup tool, refer to "5.7.1 

Intel® PROSet Installation" (

pg.165).

You have chosen to configure a SCSI Adapter for use with 

Windows 2000, using a device support disk provided by an 

adapter manufacturer.

 

Select the SCSI Adapter you want from the following list, 

or press ESC to return to the previous screen.

LSI Logic Fusion-MPT Driver for SAS1068 (Windows 2000)

The driver you provided seems to be newer than the Windows 

default driver. 

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands