Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 129

Page: 129 / 285

129

PRIMERGY RX100 S4 User’s Guide

Manu

al O

allation

Click [Finish].

Click [Close] to close the properties window.

Installing the LAN Driver

Perform the following procedures on each [Ethernet controller] under [Other devices] in [Device

Manager].

Insert the driver disk created from the ServerStart CD-ROM into the server.

Double-click [Ethernet controller] under [Other devices].

The properties window for the Ethernet controller appears.

Click [Reinstall Driver] in the [General] tab window.

The [Welcome to the Hardware Update Wizard] window appears.

Select [Install the software automatically (Recommended)] and click [Next].

The driver will be installed.

Click [Finish].

Click [Close] to close the properties window.

Remove the driver disk and restart the system.

After LAN driver installation, names of the LAN devices are displayed as follows.

4.3.3 Installing the LAN Driver (Windows 2000 Server)

Insert the driver disk created from the ServerStart CD-ROM into the server.

Right-click the [My Computer] icon on the desktop and select [Manage] from

the displayed menu.

table: LAN device name

LAN cards

LAN device name

Onboard LAN (1000BASE-T)

Broadcom NetXtreme Gigabit Ethernet

PG-1862

Intel(R) PRO/1000 MT Dual Port Server Adapter

PG-1882L

Intel(R) PRO/1000 MF Server Adapter

PG-1892L

Intel(R) PRO/1000 MT Server Adapter

PG-2861L

Intel(R) PRO/1000 PT Dual Port Server Adapter

PG-289L

Intel(R) PRO/1000 PT Server Adapter

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands