manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Share
Download
Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 22

22

Chapter 1  Overview

• ServerView (for IIS)

Install Microsoft Internet Information Server (IIS) supplied with Windows separately. ServerView is 

installed with the setting to operate using the IIS installed on the system.

When IIS is not found in the system, ServerView Web-Server is installed even if "ServerView (for IIS)" 

is selected. ServerView (for apache) is selected by default for guided mode. To install ServerView (for 

IIS), select "RAID Management Tool/ServerView (for IIS)". If "RAID Management Tool/ServerView (for 

IIS)" is selected, ServerView (for apache) is not installed. 

 

In guided mode, both ServerView (for IIS) and ServerView (for apache) cannot be released.

Intel

® 

PROSet will be installed when an optional LAN card is installed properly and a driver is applied 

correctly.

If the OS is installed on other than drive C using ServerStart, Intel

®

 PROSet will not be installed. In this 

case, install Intel

®

 PROSet manually. For details, refer to "5.7.1 Intel® PROSet Installation" (

pg.165). 

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands