256
Chapter 9 Operation and Maintenance
9.6 Restoring the System
In the unfortunate event where the system file, system configuration, or environment
changes during startup are corrupted, use the repair information stored on the
recovery disk created at the installation to restore the system.
Create a recovery disk when an OS is installed or the system configuration is changed, referring to
"5.2 Creating a Disk for System Recovery" (
If the procedures are described in the backup device manual or Readme.txt supplied with the device
driver, refer to it.
9.6.1 For Windows Server 2003/Windows Server 2003 x64
●
Items Required
• Windows Server 2003 CD-ROM
• Automated System Recovery (ASR) floppy disk (created beforehand)
• Backup media (created beforehand)
• Driver disk (for onboard array controller)
For how to create driver disks, refer to "4.1 Creating Driver Disks" (
1
Insert the Windows Server 2003 CD-ROM after turning on the server.
Check that there are no floppy disks in the floppy disk drive.
2
When a message prompting you to press the [F6] key appears immediately
after the start of setup, press the [F6] key.
3
When a message prompting you to press the [F2] key appears, press the [F2]
key.
A message prompting you to insert the ASR floppy disk appears.
4
Insert the ASR floppy disk and follow the window instructions.
5
The system restarts and a message appears. Press the [F6] key.
6
Follow the window instructions to restore the system.
Notes on Automated System Recovery
Automated System Recovery does not restore data files.
