manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Share
Download
Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 1

1

PRIMERGY RX100 S4 User’s Guide    

Areas Covered

Before Reading This Manual

                    This section explains the notes for your safety and conventions used in this manual.

 

                    Make sure to read this section.

Chapter 1

Overview

This chapter explains component names and basic operations of this server, as well as an 
overview of the software provided with this server. In addition, the workflow, from placing the 
server to starting the operation, is also described.

Chapter 2

Checking before OS Installation

This chapter explains the preparation on the server and cautions necessary before OS 
installation. Please read this chapter before starting installation.

Chapter3

OS Installation Using ServerStart

This chapter explains how to install the OS in the server using ServerStart.

Chapter4

Manual OS Installation

This chapter explains how to install the OS in the server without using ServerStart.

Chapter5

Operations after OS Installation

This chapter explains the operations to be performed after OS installation. Make sure to 
perform those operations before operating the server.

Chapter 6

High Reliability Tools

For stable PRIMERGY server operations, we recommend that high reliability tools be installed. 
This chapter explains the installation and necessary settings of high reliability tools.

Chapter 7

Installing Internal Options

This chapter explains how to install internal options on this server.

Chapter 8

Configuring Hardware and Utilities

This chapter explains how to make the environment settings necessary to operate the server and 
how to use each utility.

Chapter 9

Operation and Maintenance

This chapter explains the operations that become necessary after starting to use this server as 
well as daily care and maintenance.

Appendix

This appendix explains the specifications for the server and internal options. It also covers how 
to recycle the products.

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands