Fortinet Gate 60D, Administration Manual

Page: 675 / 706

Log&Report Reports
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
675
http://docs.fortinet.com/ • Feedback
For information about how to configure a report layout, see the FortiAnalyzer
Administration Guide .
The following procedure describes how to clone a report schedule. When you clone a
report schedule, a duplicate of the original is used as a basis for a new one.
To view the list of report schedules, go to Log&Report > Report Config .
To configure a report schedule, go to Log&Report > Report Config , select Create New ,
enter the appropriate information and then select OK .
Figure 440: Report schedules in Report Config
General report schedule settings
Create New Create a new report schedule.
Name The name of the report schedule.
Description The comment made when the report schedule was created.
Report Layout The name of the report layout used for the report schedule.
Schedule When the report schedule will be generated. The time depends on
what time period was selected when the report schedule was created:
once, daily, or specified days of the week.
For example, if you select monthly, the days of the month and time
(hh:mm) will appear in the format Monthly 2, 10, 21, 12:00.
Delete and Edit icons Delete or edit a report schedule in the list.
Clone icons Create a duplicate of the report schedule and use it as a basis for a
new report schedule.
Report schedule configuration settings
Delete
Edit
Clone