Fortinet Gate 60D Administration Manual Download Page 102

Page: 102 / 706

Restoring your configuration

Managing firmware versions

FortiGate Version 4.0 Administration Guide

102

01-400-89802-20090424

http://docs.fortinet.com/

•

Feedback

Enter the following command to copy the backed

up configuration file to restore the

file on the FortiGate unit:

execute restore allconfig <name_str> <tftp_ipv4> <passwrd>

Where

<name_str>

is the name of the backed up configuration file and

<tftp_ipv4>

is the IP address of the TFTP server and

is the password

you entered when you backed up your configuration settings. For example, if the
backed up configuration file is

confall

and the IP address of the TFTP server is

192.168.1.168

and the password is

ghrffdt123

execute restore allconfig confall 192.168.1.168 ghrffdt123

The FortiGate unit responds with the message:

This operation will overwrite the current settings and the

system will reboot!

Do you want to continue? (y/n)

Type

The FortiGate unit uploads the backed up configuration file. After the file uploads, a
message, similar to the following, is displayed:

Getting file confall from tftp server 192.168.1.168

Restoring files...

All done. Rebooting...

This may take a few minutes.

Use the CLI

show

shell command to verify your settings are restored, or log in to the

web-based manager.

Summary of Contents for Gate 60D



































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gate 60D

Reviews:

Related manuals for Gate 60D

Brands by name

Popular brands

Fortinet Gate 60D, Administration Manual

Search results

Summary of Contents for Gate 60D

Reviews:

Related manuals for Gate 60D

Brands by name

Popular brands