Fortinet Gate 60D, Administration Manual

Page: 545 / 706

IPSec VPN Monitoring VPNs
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
545
http://docs.fortinet.com/ • Feedback
To define a concentrator, go to VPN > IPSEC > Concentrator . For detailed information and
step-by-step procedures about how to set up a hub-and-spoke configuration, see the
FortiGate IPSec VPN User Guide .
Figure 357: Concentrator list
Defining concentrator options
A concentrator configuration specifies which spokes to include in an IPSec hub-and-spoke
configuration.
To specify the spokes of an IPSec hub-and-spoke configuration, go to VPN > IPSEC >
Concentrator and select Create New .
Figure 358: New VPN Concentrator
Monitoring VPNs
To view active VPN tunnels, go to User > Monitor > IPSEC . For more information, see
“IPSEC monitor list” on page 592 .
Create New Define a new concentrator for an IPSec hub-and-spoke configuration. For
more information, see
“Defining concentrator options” on page 545
.
Concentrator Name The names of existing IPSec VPN concentrators.
Members The tunnels that are associated with the concentrators.
Delete and Edit
icons Delete or edit a concentrator.
Edit
Delete
Concentrator Name Type a name for the concentrator.
Available Tunnels A list of defined IPSec VPN tunnels. Select a tunnel from the list and then
select the right arrow. Repeat these steps until all of the tunnels associated
with the spokes are included in the concentrator.
Members A list of tunnels that are members of the concentrator. To remove a tunnel
from the concentrator, select the tunnel and select the left arrow.
Right Arrow
Left Arrow