Configuring custom services
Firewall Service
FortiGate Version 4.0 Administration Guide
358
01-400-89802-20090424
To add a custom ICMP service
1
Go to
Firewall > Service > Custom
.
2
Select
Create New
.
3
Set
Protocol Type
to
ICMP
.
4
Complete the fields in the following table and select
OK
.
Figure 213: New Custom Service - ICMP
To add a custom IP service
1
Go to
Firewall > Service > Custom
.
2
Select
Create New
.
3
Set
Protocol Type
to
IP
.
4
Complete the fields in the following table and select
OK
.
Figure 214: New Custom Service - IP
Destination Port
Specify the destination port number range for the service by entering the low
and high port numbers. If the service uses one port number, enter this number
in both the
Low
and
High
fields.
Add
If your custom service requires more than one port range, select
Add
to allow
more source and destination ranges.
Delete Icon
Remove the entry from the list.
Name
Enter a name for the ICMP custom service.
Protocol Type
Select
ICMP
.
Type
Enter the ICMP type number for the service.
Code
If required, enter the ICMP code number for the service.
Name
Enter a name for the IP custom service.
Protocol Type
Select
IP
.
Protocol Number
Enter the IP protocol number for the service.
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...
