TIMS MVP
™
Setup and Configuration Guide
vii
Product Disposal Information
This product should not be disposed of with household waste. It should be deposited at an
appropriate facility to enable recovery and recycling.
Table 1
–
Guidance and MANUFACTURER’S declar
ation
–
ELECTROMAGNETIC EMISSIONS
–
for all ME EQUIPMENT and ME
SYSTEMS
Guidance and manufacturer’s declaration
- electromagnetic emissions
The TIMS MVP
™
System
needs special precautions regarding EMC (Electro Magnetic
Compatibility) and needs to be installed and put into service according to the EMC
information provided in this manual.
When TIMS MVP
™
System is exposed to electromagnetic (EM) disturbances, the system
may show abnormal behavior. For instance, the measured traces may be become
obscured, the software may crash or, in case of very high-level transient voltage events
like for instance ESD, parts of the system may even become defective.
Emissions test
Compliance
Electromagnetic environment
—
guidance
RF emissions
CISPR 11
Group 1
The TIMS MVP
™
System uses RF energy
only for its internal function. Therefore, its
RF emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class A
The EMISSIONS characteristics of the TIMS
MVP
™
System make it suitable for Class A
use in industrial areas and hospitals.
(CISPR 11 class A). If it is used in a residential
environment (for which CISPR 11 class B is
normally required) this equipment might not
offer adequate protection to radio-
frequency communication services. The user
might need to take mitigation measures,
such as relocating or re-orienting the
equipment.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
Summary of Contents for TIMS 2000 EN
Page 1: ...060000 91 Rev 1...
