Get Connected
2 TIMS MVP
™
Setup and Configuration Guide
Typical TIMS MVP
™
System Installation
These are the necessary preparation and installation steps you need to take for a typical TIMS
MVP
™
installation. You may have a configuration that requires additional steps not listed here.
Here is a checklist with all recommended steps.
TIMS MVP
™
System Checklist
(site option) means you site may not have or require the step listed.
TIMS MVP
™
System serial number: _____________________________
TIMS MVP
™
System Rev: _____________________________
Unpack TIMS MVP
™
System from its shipping boxes.
Determine the mounting location
–
usually in a control room.
•
Requires three AC outlets (TIMS MVP System, LCD & Isolator-
Splitter)
•
Requires network connection
•
Modality video & Trigger
Install the TIMS MVP
™
System.
•
Connect LCD, Keyboard, Mouse, network, audio cables
•
Set the TIMS MVP
™
System Windows system name
•
Set TIMS MVP
™
System IP Address/Subnet/Gateway
•
Set verify region and time settings.
•
Calibrate touchscreen. (site option)
•
Install anti-virus software (site option)
Make the TIMS MVP
™
System connections.
•
Connect TIMS MVP
™
System to the network.
•
Connect Isolator video and trigger to TIMS MVP
™
System.
•
Connect Modality video and trigger to Isolator.
•
Connect room monitor to the Isolator.
Install and configure microphone/speakers. (site option)
•
Omni or wireless microphone.
•
Configure microphone and speaker levels in Windows.
TIMS MVP
™
System Auto-SYNC to image.
•
Adjust image aspect ratio and quality.
•
Adjust framing.
•
Adjust black/color level and gain. (site specific)
Summary of Contents for TIMS 2000 EN
Page 1: ...060000 91 Rev 1...
