Using Auto-SYNC for Digital Input Connections
TIMS MVP
™
Setup and Configuration Guide 167
Auto-SYNC for Digital Connections
With DVI Digital and HDMI sources, not all controls are adjustable or presented since the digital
interfaces have a reference clock and the data is already in digital form.
HTotal and Phase are derived from the reference clock and are not adjustable.
Black Level and Gain (Brightness and Contrast) are adjustable on the SD+, HD+, SD+C and HD+C
board families where the digital interface allows these modifications.
Non-Adjustable settings include Htotal, Horizontal Frequency, Phase,
Vertical Total, Vertical Frequency and White Balance.
To learn how to adjust the other settings in Auto-SYNC the Auto-SYNC Wizard
is available from the Auto-SYNC top menu
VIEW
or keyboard
CTRL-W
.
Figure 70: Auto-SYNC Wizard
Auto-SYNC derives the Image Htotal and image Width and Height values etc
from the digital video signal then compares these against factory template files
then presents/writes the best match chp file.
If you have a video signal that Auto-SYNC miss calibrates to then please contact
Summary of Contents for TIMS 2000 EN
Page 1: ...060000 91 Rev 1...
