Using Auto-SYNC for Digital Input Connections
224 TIMS MVP
™
Setup and Configuration Guide
To adjust this value to the correct value for Brightness, do the following:
1.
Click your mouse cursor over the Brightness field on the left hand side.
2.
Move your mouse cursor over the lowest Contrast (Black) value on the video image.
3.
Use the down arrow key to move the Brightness (for Black) setting to 0,0,0 which is
displayed in the bottom right hand corner. Stop pressing the arrow key as soon as you
reach the 0,0,0 level since if you continue to press the key, the Black Level value will be
set too low.
The next example shows how to adjust the Contrast value when it is set too low. In this
example, the Contrast is based on the white level should be set to 255,255,255.
Summary of Contents for TIMS 2000 EN
Page 1: ...060000 91 Rev 1...