Using Auto-SYNC for Digital Input Connections
180 TIMS MVP
™
Setup and Configuration Guide
To adjust the contrast value that is set too high, do the following:
1.
Click your mouse cursor over the Contrast field on the left hand side.
2.
Move your mouse cursor over the lowest Contrast (White) value on the video image
which in this case is 255,255,255.
3.
Use the down arrow key to move the Contrast setting to the next value below
255,255,255 which is displayed in the bottom right hand corner. Stop pressing the arrow
key as soon as you reach the first value below 255,255,255.
4.
Use the up arrow to return to the next value up, which should be 255,255,255. The
Contrast is now properly set.
Tips:
When making Brightness/Contrast adjustments:
•
Have the pixel reader in Full Window mode.
•
Have the Histogram in Quad Window mode.
•
Adjust Brightness for the level of Black.
•
Adjust Contrast for level of White.
•
Ensure Brightness/Contrast is not clipped.
Summary of Contents for TIMS 2000 EN
Page 1: ...060000 91 Rev 1...
