IDEA Auto-SYNC with RGB/VGA/DVI Analog Video
TIMS MVP
™
Setup and Configuration Guide 133
In order to adjust the setting, do the following:
1.
Click your mouse in the Brightness field.
2.
Move your mouse over the black area of the image until you find the value 0,0,0 in
the bottom right hand corner. For example, in the screen example below, move
the mouse to the black box labeled.
3.
Press the up arrow key once to see if the 0,0,0 value increases. If it does not
increase above 0,0,0, then the black value is set too low. Keep pressing the up
arrow until you reach the next value above 0,0,0.
4.
Once you have reached the next value above 0,0,0, then use the down arrow to
move back to the 0,0,0 value. The Brightness is now set properly
Summary of Contents for TIMS 2000 EN
Page 1: ...060000 91 Rev 1...
