Foma SA800i, Manual

Page: 477 / 564

475
AT co
mman
d
Da
ta
co
mmu
nic
a
tio
n
AT
c
CGEQMIN Registers the criteria
for judging whether to
permit QoS (quality of
service) sent from
network when PPP
packet communication
is established.
*
2
See "Supplement to AT command"
J
P482
See "Supplement to
AT command"
J
P482
AT
c
CGEQREQ Registers the criteria
for judging whether to
permit QoS (Quality of
Service) requesting for
network when packet
communication is
established.
*
2
See "Supplement to AT command"
J
P483
See "Supplement to
AT command"
J
P483
AT
c
CGMR Displays the FOMA
terminal version. AT
c
CGMR
123456789
0123456
OK
AT
c
CGREG=<n> Sets whether to report
network service
registration status. The
status reported is
"Within service area"
or "Out of service
area".
1
*
<n>
0:Not notified (default).
1:Notified.
When "AT
c
CGREG=1" is set, when
the terminal is moved from "Within
service area" to "Out of service area"
or vice versa, the status is reported in
the format "
c
CGREG:<stat>". <stat>
parameter supports "0, 1, 4".
<stat>
0:Out of service area
1:Within service area (home)
4:Unknown
When "AT
c
CGREG?" is set,
"
c
CGREG:<n>, <stat>" is displayed.
AT
c
CGREG=1
OK
(Set to "Notified".)
AT
c
CGREG?
c
CGREG:1, 0
OK
(Means Notified, out of
service area.)
AT
c
CGSN Displays FOMA
terminal serial No. AT
c
CGSN
123456789
012345
OK
AT
c
CLIP=<n> Sets whether to
display Caller ID of
sender on PC when
64K data
communication is to
received.
1
*
<n>
0:Does not display the result (default).
1:Displays the result.
When "AT
c
CLIR?" is set,
"
c
CLIR:<n>, <m>" is displayed.
<m>
0:Does not send Caller ID to remote
device when sending communication.
1:Sends Caller ID to remote device
when sending communication.
2:Unknown
AT
c
CLIP=0
OK
AT command Overview Parameters/Description Command examples
See next page
DSC01_E.book 475 ページ ２００６年２月１４日 火曜日 午後１２時３１分