Foma SA800i Manual Download Page 215

Page: 215 / 564

213

i-me

mod

/i-mo

tio
n

Information

i-melody

i-melody

Downloading i-melody from sites

Download i-melody from sites displayed on the screen, and set to Ring tone.

Select a melody to download from a site and press

･

Press

[Cancel] to cancel download.

Press

"Save".

A saved melody is to be saved as "Data box"

"Melody"

"i-mode" folder.

■

Playing the melody

Press

"Play".

■

Setting the melody to Ring tone etc. directly after saving

Press

"Set".

･

Following operations:

P382 "Setting the melody as Ring tone etc." Step 3

■

Displaying the melody property

Press

"File property".

■

Returning without saving

Press

"Return"

Press

"Yes".

･

Press

"No" to cancel.

Press

"Return".

Information

･

The number of data allowed to save in FOMA terminal

P354

･

The maximum size for 1 file to be saved in FOMA terminal is approximately 100 KB.

･

Some images may not be displayed correctly.

･

When the size of still image is larger than the screen, the image is reduced to display.

･

Images of the size over 640

480 in GIF format (or 240

320 in animation GIF format) in width and height

or height and width cannot be saved. Also some JPEG types may not be saved.

･

When there is not enough available storage space for still images to be saved or the number of images exceeds

the allowable maximum number

P389

･

The number of data allowed to save in FOMA terminals, and the maximum size

P354

･

Some melodies may not be played correctly.

･

When there is not enough available storage space for still images to be saved or the number of images exceeds

the allowable maximum number

P389

DSC01_E.book 213 ページ２００６年２月１４日　火曜日　午前１１時４９分

Summary of Contents for SA800i





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands

Foma SA800i, Manual

Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands