Foma SA800i Manual Download Page 444

Page: 444 / 564

442

Vo
ic

e mail

k s
e

Press

"Ringing time".

Press

"Yes".

•

Press

"No" to cancel.

Enter Ringing time and press

•

Ringing time can be set between 0 to 120

seconds.

Checking messages

is displayed on Stand-by display with a new

message. The number in the icon indicates number of

messages left.

Press

"Play message".

Press

"Yes".

Makes a call to 1417. Operate following the voice

guidance and check messages.

•

Press

"No" to cancel.

Using voice guidance to set up Voice
mail service

Follow the voice guidance, and set Voice mail service,

or to check messages.

Press

"Activate service".

Press

"Yes".

Makes a call to 1416. Operate following the voice

guidance.

•

Press

"No" to cancel.

Checking messages

Check whether new messages are left in Voice mail

center.

Press

"Check message".

Connecting to Voice mail center and a message

notifying status is displayed.

The icon of Voice mail is displayed on Stand-by

display with a new message. The number in the

icon indicates the number of messages left.

Information

Confirming and editing the setting of
Voice mail service

Press

"Status request".

Connecting to Voice mail center and the current

status is displayed.

•

Press

[Function] to set Activate/Deactivate/

Ringing time of Voice mail service.

•

Press

to return to Voice mail menu screen.

Setting Ring tone to play with new
message <Ring message notice>

Notices that a new message is saved in Voice mail

center with Melody and/or Vibrator.

•

Operates LED/Vibrator/Volume/Notice time with
settings of Receive message.

Press

"Ring message notice".

Press

"Melody".

•

Melody can be selected from the folder of

"Melody" in "Data box".

•

Press

"OFF" not to play Ring tone.

further operation is needed.

Vibrator or other

functions are not activated when setting "OFF".

Select a folder and press

Select a melody and press

•

Press

[Play] to check melody.

Information

• New messages recorded after checking once may not

be confirmed even you check again.

Default

Melody:

オルガン

(Organ)

• Notice tone sounds when a new message arrives on

checking the message.

• Notice tone does not sound if no message remains, or

the number of messages is unchanged or declined for
the expired period of messages saved. However, the
tone rings when the icon of Voice mail is not displayed
on Stand-by display. (Unless the number of Voice
message is decreased to 0.)

DSC01_E.book 442 ページ２００６年２月１４日　火曜日　午後１２時３１分

Summary of Contents for SA800i





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands

Foma SA800i, Manual

Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands