Foma SA800i, Manual

Page: 23 / 564

21
H
a
nd
lin
g
in
st
ru
cti
o
n
s
Quick search/
Contents/Precautions
Handling instructions
Handling instructions
General
･
Do not wet FOMA terminal.
- FOMA terminal, battery pack and adapter (including battery charger) are not waterproof. Do not use
FOMA terminal in bathrooms, other high-humidity areas, or in the rain. Also sweat may corrode the
inner components and cause malfunction when carrying FOMA terminal near your body.
Note that malfunctions proved to be caused by water are not covered by the warranty, and may not be
possible to repair. Since these malfunctions are not covered with warranty, repair, if possible, is to be
done with owner's expense.
･
Clean FOMA terminal with a dry, soft cloth.
- Some FOMA terminal models may use the special coating on the display for higher visibility. When
cleaning FOMA terminal, rubbing it roughly with a dry cloth may scratch the display. Be careful to
handle FOMA terminal, and use a soft and dry cloth for cleaning (such as a cloth for eyeglasses). Drops
of water or dirt left on the display may cause stains or removal of the coating.
- The printing may disappear or color may fade for wiping with alcohol, paint thinner, benzine or
detergent.
･
Clean connecting terminals occasionally, with a dry cotton swab.
- Dirty connecting terminals may cause loose contact with FOMA terminal, resulting in powering off. Also
results in poor charging, so clean connecting terminals with a dry cloth or cotton swab etc.
･
Do not place FOMA terminal near the air outlet of an air-conditioner.
- A rapid change in humidity may cause dew condensation, leading to internal corrosion and
malfunction.
･
Do not place FOMA terminal in a place where excessive force is applied.
- Damage and malfunction of LC display or internal PCB caused by cramming into a brimming bag or
putting in a pocket and sitting on FOMA terminal is out of the coverage of the warranty.
･
Read the respective instructions attached to the battery pack and the adapter (including battery charger)
carefully.
Handling FOMA terminal
･
It is normal for FOMA terminal to be warmed up when using or charging. Keep using FOMA terminal.
･
Avoid extremely high or low temperature.
- Use FOMA terminal at temperature between 5 and 35
r and at humidity between 45 and 85 %.
･
FOMA terminal may affect fixed-line telephones, TVs or radios nearby. Use FOMA terminal as far as
possible from these appliances.
･
Keep a separate written record of the data you register in FOMA terminal.
- Note that DoCoMo assumes no responsibility for accidentally erased data.
･
Do not sit down with FOMA terminal in a back pocket. Do not place FOMA terminal at the bottom of a
bag or anywhere it will encounter excessive force.
- Malfunction or damage may result.
･
Do not fold FOMA terminal with the strap caught between the folding parts.
- Malfunction or damage may result.