background image

311

i-

g

p

p

li To 

fu

nc
tio
n

i-

g

pp
li

3

Press one of 

1

 to 

3

.

4

Enter time and date and press 

C

.

5

Press 

p

 [Complete].

Information

i-

g

ppli To function

i-

g

ppli To function

Starting i-

g

ppli software from sites or mails

You can start i-

g

ppli software from other functions, such as sites, mails, infrared communication, 

and Bar code etc.

1

Select the item linking to software and press 

C

.

2

Press 

1

 "Yes".

Press 

2

 "No" not to start.

Once only

Starts automatically just once on the registered time and date.

Daily

Starts automatically at the same time every day.

Day of week

Starts automatically at the registered time on the selected day of the week,  
every week. 

a

Select the day of the week to start automatically and press 

C

Press 

C

 again to cancel.

b

Press 

p

 [Complete].

If i-

g

ppli auto start and Alarms, such as Schedule alarm, are set at the same time, the priority goes to Alarm 

setting and i-

g

ppli is not activated. And also software may not start while operating other functions such as 

composing mails. 

Failed Auto start is recorded and saved in Auto start failure history.

Multiple software cannot be started automatically at the same time. The error message is displayed in an 

attempt to enter the same time as another software.

Also software may not be activated automatically if the same software has been started automatically within 

the last 10 minutes. Set the interval time between auto start settings more than 10 minutes.

Start i αppli

指定

Check

 No

software?

         Run selected

 Yes

See next page

DSC01_E.book  311 ページ  2006年2月14日 火曜日 午後12時31分

Summary of Contents for SA800i





















































































































































































































































































































































































































































































































































































Reviews: