Foma SA800i, Manual

Page: 458 / 564

456
Co
nn
e
c
ti
ng
PC to
FOMA
ter
m
in
al
Da
ta
co
mmu
nic
a
tio
n
Operating environment
Refer to the following PC environments to operate the
communication configuration files/FOMA PC
configuration software.
•
Installation may not be available depending on the
settings of your PC environment.
Information
Connecting PC to FOMA terminal
Connecting PC to FOMA terminal
Connect PC to FOMA terminal.
• FOMA USB connection cable (optional) is required
to connect.
1
Uncap the external connection port of
FOMA terminal and insert an end of FOMA
USB connection cable into the external
connection port.
2
Insert the other end of FOMA USB
connection cable into the PC USB
connector.
• Wizard screen is displayed, when connecting to
PC before installing the communication
configuration files. In that case, remove FOMA
terminal and click "Cancel".
• Procedure of installation
Windows XP
J
P457
Windows 2000
J
P457
Windows 98/Me
J
P457
• appears on the screen of FOMA terminal
when connected to PC.
■ Removing FOMA USB connection cable
a
Pull out FOMA USB connection cable
horizontally with pressing the release
buttons.
•
Do not force to putt, or it may cause damage.
b
Pull the FOMA USB connection cable out of
PC.
Information
Item Requirements
PC PC/AT compatible computer
USB port (compatible with USB 1.1 and
later)
OS (each
Japanese version) Windows 98, Me, 2000, XP
Memory
requirements Windows 98, Me : 32 MB or more
Windows 2000 : 64 MB or more
Windows XP : 128 MB or more
Hard disk Capacity 5 MB or more free disk space
• Memory requirements and hard disk capacity may
vary according to the PC system configurations.
• No responsibility is assumed in operation after
upgrading.
• Note that the files/software cannot be used in some
operating environments. Furthermore, operation will
not be guaranteed without previously described
environment, and DoCoMo assumes no responsibility
for pertaining to operation out of the described
conditions.
• Do not remove FOMA USB connection cable during
data communication. Data corruption may occur.
• If PC does not recognize FOMA terminal any more,
uninstall and reinstall the communication configuration
files.
Uncap the external
connection port.
Insert the connector
with the print facing up.
USB connector
Release buttons
DSC01_E.book 456 ページ ２００６年２月１４日 火曜日 午後１２時３１分