Foma SA800i Manual Download Page 226

Page: 226 / 564

224

Ch
ec
k ne

w mess

ag
e

mod

/i-mo

tio
n

Check new message

Check new message

Checking MessageR/F

Check whether MessageR/F is received in the i-mode Center while the terminal has been out of
service area or powered off.

･

Note that new messages cannot be checked under the poor radio wave condition.

Press

Receive i-mode mails when MessageR/F is stored in the i-mode Center.

･

The operation for checking i-mode mails is the same as for checking MessageR/F.

Information

MessageR/MessageF

MessageR/MessageF

Displaying MessageR/F stored in message boxes

The received MessageR/F is saved in FOMA terminal.

<ex> Displaying MessageR

Press

Displays MessageR list screen.

･

Press

to display MessageF.

Select a MessageR and press

Displays the MessageR screen.

Information

･

If any MessageR/F is saved in the i-mode Center,

appears. Note that there may be some conditions

that MessageR/F are not displayed (ex: when powered off or out of service area).

･

The default setting of checking new message is to receive all mails of "i-mode mail"/ "MessageR"/"MessageF".

To avoid receiving MessageR or MessageF, release the settings.

･

When setting "Attach melody setting" to "Auto-play", displays MessageR/F with melodies and automatically

starts playing melodies with the volume set on Ring tone setting each for MessageR and MessageF. Press

to stop playing the melody halfway.

･

Press

[Function]

Press

"Check attachment" to check attachment files of received messages.

･

Images displayed on received messages can be saved in FOMA terminal.

P264

･

Melodies can be saved in FOMA terminal. The operation is the same as saving melodies from sites.

P262

･

The function of Phone To (AV Phone To)/Mail To/Web To is available.

P215

DSC01_E.book 224 ページ２００６年２月１４日　火曜日　午前１１時４９分

Summary of Contents for SA800i





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands

Foma SA800i, Manual

Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands