Foma SA800i Manual Download Page 296

Page: 296 / 564

294

ece

ive SMS

Mail

Information

Editing or sending sent/saved SMS (Short Message)

SMS sent, saved without sending, or failed to send can be edited or sent.

P255

Receive SMS

Receive SMS

When receiving SMS (Short Message)

SMS is received automatically when FOMA terminals are within service area. Received SMS is
saved to Inbox.

･

Inbox can save SMS in conjunction with i-mode mails up to 1,000.

･

SMS sent under following conditions are to be saved in the SMS Center:

Receive SMS.

blinks and "Receiving

SMS

" is displayed. The icon stays on the screen after finishing receiving mails.

･

: Unread i-mode mails and SMS are saved.

･

: Unread SMS

Message ring tone sounds, the incoming-call lamp lights up/blinks and the number of Received
messages is displayed.

･

When folding FOMA terminals, Reception status is displayed on Backside-display.

P33

･

Under the poor radio wave condition, characters may not be displayed properly on the other party.

･

When transmission fails, an error message is displayed and SMS is saved to Unsent messages box. SMS in

Unsent messages box can be edited or sent.

P255

･

When transmission is completed properly, SMS is saved in Outbox. When there is not enough storage space

left in Outbox, or the number of mails in Outbox has reached the maximum, unprotected Sent messages are

overwritten in order from the oldest. Be sure to protect Sent messages that you need to keep.

P278

･

Font type or whether to receive an SMS report can be set in SMS Settings in advance (

P296). "SMS report

request" or "Message validity" can be changed by pressing

[Function] after starting to compose SMS. Set

status is valid only for currently composing SMS.

･

If SMS is sent when SMS report request is set to "ON", an SMS report notifies that FOMA terminal of the other

party received SMS. SMS reports are saved to Inbox.

･

Even if "Notify no callerID" has been set, Caller ID is sent to the receiver when sending SMS.

･

Some Font type may not be sent.

P240

･

SMS cannot be composed when the memory is not left enough, or the number of saved mail has reached the

maximum, due to Unsent or protected mails. Delete unnecessary i-mode mails and/or SMS from Outbox/

Unsent message box.

P278

･

When subscribing to Multinumber service, set Initial number to the default in set multinumber.

- Under Self mode

- Exchanging infrared data

- When the power is OFF

- Out of service area

- When Inbox is full of protected or unread mails

- When UIM (FOMA card) is full of saved SMS

SMS reception status

screen

ＲｅｃｅｉｖｅＳＭＳｍｅｓｓａｇｅ

ＲｅｃｅｉｖｉｎｇＳＭＳ

Ｒｅｃｅｐｔｉｏｎｓｔａｔｕｓ

Ｍａｉｌ

１

Ｍｅｓｓａｇｅ

Ｒ０

Ｍｅｓｓａｇｅ

Ｆ０

DSC01_E.book 294 ページ２００６年２月１４日　火曜日　午前１１時４９分

Summary of Contents for SA800i





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands

Foma SA800i, Manual

Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands