Foma SA800i Manual Download Page 314

Page: 314 / 564

312

pp
li st
an
d-

by
d

ispl
a

pp
li

Information

Setting whether to start with i-

ppli To software <i-

ppli To>

Sets each i-

ppli software whether to be started from sites or Mails etc.

･

Some i-

ppli software cannot be set to start from sites or mails.

Select an i-

ppli from i-

ppli list screen and press

[Function]

Press

"Software act"

Press

"Set i-

ppli To".

Press

"Yes" or

"No".

ppli stand-by display

Setting i-

ppli stand-by display

You can set i-

ppli software as Stand-by display, from which to start and operate i-

ppli software.

･

To set i-

ppli stand-by display, the software for Stand-by display must be downloaded in advance.

･

Some software cannot be set as i-

ppli stand-by display.

･

When i-

ppli stand-by display is activated, "

" or "

" is displayed.

･

ppli stand-by display setting is prior to Wallpaper in Stand-by display setting.

･

Only one software can be set for i-

ppli stand-by display.

･

Connection to a site (Web To) cannot be made from i-

ppli stand-by display.

Setting i-

ppli stand-by display

Press

"Set".

Select an i-

ppli and press

Press

"Yes" or

"No".

Setting from i-

ppli software list

Select an i-

ppli from i-

ppli list screen and press

[Function]

Press

"Software act"

Press

"Stand-by display".

･

The software to start must be saved in FOMA terminal in advance. However, some i-

ppli software which are

executed from sites open immediately after download is completed (Instant start i-

ppli). In this case, software

is not saved yet, and the confirmation screen whether to save is displayed when closing the software. Some

Instant start i-

ppli software cannot be saved to FOMA terminal.

･

If the software to start is not saved in FOMA terminal, a message "No requested software" is displayed.

･

Some instant start i-

ppli software may displays the confirmation screen whether to connect to network when

starting.

･

ppli software does not start when i-

ppli To is set to "No".

･

After ending the i-

ppli or forced termination by error, the screen returns to the previous place where the i-

ppli

software was started.

DSC01_E.book 312 ページ２００６年２月１４日　火曜日　午後１２時３１分

Summary of Contents for SA800i





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands

Foma SA800i, Manual

Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands