Foma SA800i Manual Download Page 53

Page: 53 / 564

GPS time

ttin
g

Be
for
e

us
in

g SA8

Information

GPS time setting

GPS time setting

Set time by using GPS

Synchronize the time of FOMA terminal correctly by using GPS.

•

The correction is not available out of service area or under Self mode.

Press

"ON".

Positioning starts, and the time is to be corrected. (Positioning icon does not appear.

）

•

Press

"OFF" not to set.

Information

CallerID notification

CallerID notification

Notifying your phone number to the other party

Display the phone number of your FOMA terminal (Caller ID) on the other party's screen in making
a call.

•

Caller ID is an important information. Be careful when you notify your Caller ID information in making a
call.

•

CallerID notification is not available to be set when "

圏外

(out of service area)" is displayed.

Press

"Activate".

•

Press

"Deactivate" not to notify.

Enter the network security code and press

■

Checking current setting

Press

•

Following functions are not available until the time and date is set:

- SSL session (Authentication)

- i-

ppli auto start - Starting i-

ppliDX

- Starting the browser from i-

ppli

- Shooting still image/movie

- Recording with Voice recorder

- Periodical notification etc.

Some sites are available without setting time and date.

•

Time and date is to be displayed by setting time and date in the following functions.

- Redial

- Received calls

- Record message

- Calling/Stand-by voice memo

- Received/Sent addresses etc.

•

The set time and date is saved even when exchanging the battery pack or when the battery is run out. However,

the time and date is reset by leaving the battery being run out for an extended period of time. In that case,

make the setting again.

Default

OFF

•

When GPS time setting is set to "ON", time of FOMA terminal is automatically corrected by every positioning

such as Position location.

•

Positioning for GPS time setting is not saved to Location history.

See next page

DSC01_E.book 51 ページ２００６年２月１４日　火曜日　午前１１時１５分

Summary of Contents for SA800i





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands

Foma SA800i, Manual

Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands