Foma SA800i, Manual

Page: 349 / 564

347
Bu
rg
la
r a
la
rm
Bur
g
la
r al
ar
m
Burglar alarm
Burglar alarm
Ringing Burglar alarm
When ringing Burglar alarm, you can call the registered phone number, and/or you can notify the
current location automatically (Location provide) if registering the receiver to the searching target
of " イマドコサーチ (Searching position)" service. Refer to NTT DoCoMo Internet site for " イマドコ
サーチ
(Searching position)" service.
･
When Urgent contact have been registered and Burglar alarm is set to "Alarm and phone call", FOMA
terminal dials to Urgent contacts repeatedly to alert emergency until the registered persons answer the
calls.
･
Avoid dialing by using Burglar alarm except in the case of emergencies.
･
Burglar alarm does not ring during Software update.
･
Burglar alarm rings even when turning the power off. And the power is turned on at the time of ringing
Burglar alarm. The power is kept turned on if stopping Burglar alarm.
･
Burglar alarm rings even under Manner mode or Public mode (Drive mode).
･
Burglar alarm rings only through the speaker in connecting to Flat-plug Earphone/Microphone with a
switch (optional) with any setting on Output ring tone to. Auto receive call is invalid in this case.
･
Burglar alarm switch may be activated by accidents, in such cases as the strap attached to the switch is
caught.
･
Location cannot be provided when "Loc. Provide OFF" is set.
1
Set Burglar switch to ON.
■ Canceling Dial phone call/Location provide
Press
p
[Cancel]
s
Enter the terminal security code and press
C
.
･
Burglar alarm keeps ringing.
･
Enter Password(number) and press
C
, under Kids’ mode.
■
Stopping Burglar alarm
Alarm rings, and "EMERGENCY" is displayed on
Stand-by screen.
and blink.
･
Slide Burglar alarm lever to the direction of the
arrow, when the strap is not tied to the terminal.
Set Burglar switch to OFF.
･
Dial phone call or Location provide being set is not
canceled by stopping Burglar alarm.
DSC01_E.book 347 ページ ２００６年２月１４日 火曜日 午後１２時３１分