Foma SA800i Manual Download Page 376

Page: 376 / 564

374

Edit

mot

ion

Di
sp
la

ng
/edi
ting/
ma

na
gi

ng
d

Press

"Save new entry".

■

Overwriting edited data on original movie/i-motion

Press

"Overwrite"

Press

"Yes".

･

Press

"No" to cancel.

Enter the title and press

･

Up to 18 two-byte (Full Mark)/36 one-byte (Half Mark) characters can be entered.

Cutting out movie image

Cuts out the specified range of movie/i-motion.

･

Even if the original movie/i-motion has Ticker, the movie clipped out does not include Ticker.

･

More than one clip can be cut out of the same movie/i-motion.

Press

"Cut out movie img" on Edit i-motion menu.

Press one of

Specify the range to cut out.

■

When selecting "Attach i-mode msg" or "Atch large vol.msg"

Press

[Start] at starting point to cut out.

･

Press

to start the movie and press

[Start], to cut out from the middle of a movie.

･

If the file size is smaller than approximately 290 KB (in selecting "Attach i-mode msg") or
approximately 490 KB (in selecting "Atch large vol.msg"),

[Start] is not displayed. Press

start the movie and press

[Start].

･

Press

[Redo] to redo.

･

Movie may not be able to cut out, depending on the specified starting point.

■

When selecting "Unrestricted"

Press

[Start] at the start point to cut out and

[End] at the end point.

･

Press

to start the movie and press

[Start] / [End], to cut out from the middle of the movie.

･

Press

[Redo] to redo.

･

Movie may not be able to cut out, depending on specified starting/ending point.

Press

"Yes".

･

Press

"No" to redo the cutting out.

Press

･

Press

[Play] to play and confirm the clipped movie.

Press

[Save new entry]

Press

"Yes".

･

Press

"No" to cancel.

Attach i-mode msg

：

Data attachable to i-mode mail (approximately 290 KB) can be clipped out
from the specified scene.

Atch large vol.msg

：

Data attachable to i-mode mail as large volume message (approximately 490
KB) can be clipped out from the specified scene.

Unrestricted

：

Any range can be clipped out.

DSC01_E.book 374 ページ２００６年２月１４日　火曜日　午後１２時３１分

Summary of Contents for SA800i





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands

Foma SA800i, Manual

Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands