Foma SA800i, Manual

Page: 482 / 564

480
AT co
mman
d
Da
ta
co
mmu
nic
a
tio
n
ATS2=<n> Sets the escape
character. n=0 to 127 (default: n=43)
When n=127 is set, escape is invalid. ATS2=43
OK
ATS2?
043
OK
ATS3=<n> Sets the carriage
return (CR) character. Defines the character used to identify
the end of AT command character
strings. Appended to the end of
echoed command character strings
and result codes. The set value cannot
be changed. (default: n=13) ATS3=13
OK
ATS3?
013
OK
ATS4=<n> Sets the line feed (LF)
character. When result code is displayed in
alphabetical characters, appended
after [CR] character. The set value
cannot be changed. (default: n=10) ATS4=10
OK
ATS4?
010
OK
ATS5=<n> Sets the back space
(BS) character. When this character is detected during
AT command input, the last character
in the input buffer is deleted. The set
value cannot be changed. (default:
n=8) ATS5=8
OK
ATS5?
008
OK
ATS6=<n> Sets the duration of
pause (in seconds)
until dialing starts. The Register is set by this command,
but performs no operation.
n:2 to 10 (default: n=5) ATS6=10
OK
ATS7=<n> Sets waiting time (in
seconds) until
connection
completion.
1
*
n:1 to 255 (default: n=60)
When sending 64K data
communication or packet
communication, if the set number of
seconds after FOMA terminal receives
"ATD" input from PC has elapsed but
the terminal cannot send "CONNECT"
to PC, the "NO CARRIER" result is
returned, and the disconnection
process is performed next. If the value
is set between "121 and 255", "OK"
result is returned, but the value is set to
"120". ATS7=60
OK
ATS8=<n> Sets pause time (in
seconds) when
commas are dialed. This command sets the Register but
does not affect the pause time (3 sec).
n=0:Not paused
n:1 to 255 (default: n=3) ATS8=3
OK
ATS10=<n> Sets the delay time (in
seconds) for automatic
disconnection (1/10
second).
1
*
The Register is set by this command,
but performs no operation.
n:1 to 255 (default: n=1) ATS10=1
OK
ATS30=<n> Terminal is
disconnected if no data
is sent or received for
longer than the time
set here. The setting made by this command is
valid only during 64K data
communication. <n> is set in minute.
n:0 to 255 (default: n=0)
With n=0, inactive timer is set to "OFF". ATS30=3
OK
AT command Overview Parameters/Description Command examples
DSC01_E.book 480 ページ ２００６年２月１４日 火曜日 午後１２時３１分