Foma SA800i Manual Download Page 184

Page: 184 / 564

182

Ba
r co

de
r

ade

Ca
mera

Scanning codes

Scan JAN code or QR code using FOMA terminal built-in camera.

･

Codes can be scanned with Out-camera only.

･

Scratches, dirt, damages, low print quality and the strong reflection of light may disable code scanning.

･

Codes may not be scanned depending on the type, version and size of bar codes.

Switch to Close-up mode.

･

Switching to Close-up mode

P177

Hold down

(

) for over a second on Stand-by display.

Press

[Function]

Press

"Camera-mode"

Press

"Bar

code reader".

Set Out-camera apart approximately 7 cm from the code, to display

the entire code on the screen.

Press

：

Bar code reader is active.

：

Lighted on.

：

Light is not available due to low temperature.

：

Reading in Close-up mode.

･

Operate FOMA terminal with your hands stable.

■

Scanning codes with light turned on

Press

[Function]

Press

"Light"

Press

"ON".

･

Press

"OFF" not to turn on the light.

After "Scanning" is displayed, the scanned result is displayed.

ＬＩｓｔ

Ｓｃａｎ

Ｆｕｎｃｔｉｏｎ

a
b

Bar code reader

screen

Approx. 7cm

Ｂａｒｃｏｄｅｒｅａｄｅｒ
株式会社ＮＴＴドコモ

Ｓａｖｅ

Ｆｕｎｃｔｉｏｎ

DSC01_E.book 182 ページ２００６年２月１４日　火曜日　午前１１時４９分

Summary of Contents for SA800i





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands

Foma SA800i, Manual

Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands