Foma SA800i, Manual

Page: 466 / 564

464
Se
tti
ng
u
p
wi
th
us
in
g
FOMA PC
con
fig
u
ra
tion s
o
ftw
a
re
Da
ta
co
mmu
nic
a
tio
n
Disconnecting the communication
Closing the Internet browser alone may not disconnect
the connection. To ensure disconnection, follow the
operations:
•
Describes the setting on Windows XP as an
example. If using other OS, screens shown in this
manual are different from the actual ones.
1
Double-click the icon of dialup connection.
The status screen is displayed.
2
Click " 切断 (Disconnect)".
Information
Uninstalling FOMA PC configuration
software
Uninstall FOMA PC configuration software in the
following methods when needed.
• This section describes the uninstallation from
Windows XP as an example. Refer to each manual
in using other OS.
•
Uninstall on Windows XP or Windows 2000 after
logging on with the name having administrative right.
Uninstalling with any other name results an error.
For procedures to set administrative right of PC,
contact to the PC manufacturer or Microsoft
Corporation.
•
Before uninstallation, make sure no other programs
are activated. Save and exit all active programs and
restart uninstallation.
1
Right-click W-TCP setup icon ( ) in
Notify area and click " 常駐させない (Not be
resident)".
• The icon is not displayed when W-TCP
configuration is set not to reside. Proceed the
uninstallation.
2
Click " スタート (Start)"
s
Click " コントロールパ
ネル (Control Panel)"
s
Double-click " プログラ
ムの追加と削除 (Add or Remove Programs)".
3
Select "NTT DoCoMo FOMA PC 設定ソフト
(FOMA PC Configuration Software)" and
click "
変更と削除
(Change/Remove)".
4
Confirm the program name and click "
はい
(Yes)".
Uninstallation starts.
5
Click "OK".
Information
W-TCP setup
Set "W-TCP
設定
(W-TCP setup)" to optimize packet
communication configuration on PC for FOMA network.
•
"W-TCP 設定 (W-TCP setup)" is a "TCP parameter
tuning tool" for optimizing TCP/IP transmission
capacity during packet communication in FOMA
network. This communication setup is required to
make full use of the communication capability of
FOMA terminal.
Activating and deactivating system
optimization (Windows XP)
System optimization can be performed for each dialup
connection in Windows XP.
1
Start "FOMA PC 設定ソフト (FOMA PC
configuration software)", and click "W-TCP
設定
(W-TCP Setup)".
• Click FOMA PC configuration software on Start
menu or click
in Notify area to start FOMA
PC configuration software.
• The transmission speed displayed on the PC may
differ from the actual speed.
• Incoming voice-calls are receivable during packet
communication. SMS is also receivable.
During 64K data communication, terminate the
connection to receive the incoming call with Call
waiting service. SMS is also receivable. In this case,
no sound plays (such as Ring tone etc.) but notifies
only with icons or Receiving screen.
• Voice mail service or other network services are also
available for incoming calls during packet
communication/64K data communication.
• When W-TCP is optimized, the screen to release the
optimization is displayed during uninstallation. Click
"
はい
(Yes)" and reboot PC according to the
instruction on the screen.
DSC01_E.book 464 ページ ２００６年２月１４日 火曜日 午後１２時３１分