Foma SA800i Manual Download Page 52

Page: 52 / 564

me an

d da

se
tt

Be
for
e

us
in

g SA8

Change the terminal security code.

•

Setting procedure

P144

•

The default setting is "0000".

Change Password(number).

•

Setting procedure

P56

•

The default setting is "1111".

Set Keypad sound.

•

Setting procedure

P124

Change CallerID notification setting.

•

Setting procedure

P51

Set Kids' mode.

•

Setting procedure

P54

Check the status of Location provide setting and press

Press

"Start next time" or

"Not start".

•

To start Initial setting every time the power is turned on, press

"Start next time".

Information

Time and date setting

Time and date setting

Setting time and date

Sets the time and date of FOMA terminal. Time and date setting is displayed on the screen or
Backside-display after setting.

•

Time and date can be entered between 0:00, January 1st, 2000 and 23:59, December 31st, 2099.

<ex> Setting as 10:30, April 10th, 2006

Press

Enter time, date and the last 2 digits of the year, and press

The time and date is set.

•

Press keys as "1030041006" here.

•

When month or date is a digit between 1 to 9, enter 0 for preceding. (ex : For September, enter
"09".)

•

Alternatively, press

to highlight, and press keys or

to set time and date.

•

If the setting is aborted by pressing

etc., functions for the completed settings are active.

Ｔｉｍｅａｎｄｄａｔｅｓｅｔｔｉｎｇ

（ＭＭ／ＤＤ／ＹＹＹＹ）

：

／／２０

DSC01_E.book 50 ページ２００６年２月１４日　火曜日　午前１１時１５分

Summary of Contents for SA800i





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands

Foma SA800i, Manual

Search results

Summary of Contents for SA800i

Reviews:

Related manuals for SA800i

Brands by name

Popular brands