Foma P901ITV, User Manual

Page: 432 / 521

425
Data
Communi
ca
tio
n
Conn
ect
ing
Dia
l-
up
<For Windows
®
Me>
Click the “ ネットワーク (Network)” tab, then
carry out respective settings.
Select “PPP:
インターネット、
Windows 2000/NT
、
Windows Me
(PPP: Internet, Windows 2000/NT, Windows Me)” from the “
ダイア
ルアップサーバーの種類
(Dial up server type)” field. Do not put a
check mark for the “
詳細オプション
(Detailed option)” field, instead,
put a check mark for TCP/IP only on the “
使用できるネットワーク
プロトコル
(Usable network protocol)” field.
p The display position of the “
ネットワーク
(Network)” tab varies
depending on the personal computer you use.
p
Contact your Internet service provider or network
administrator for the setting contents in the “
ネットワーク
(Network)” tab.
11
Click the “
セキュリティ
(Security)” tab, then
enter the “
ユーザー名
(user name)” and “
パス
ワード
(password)” supplied from your
Internet service provider or network
administrator.
p
If you put a check mark for “
自動的に接続する
(Automatically
connect)” in advance, the screen for confirming the user name and
password does not appear at connection; so, you can immediately
connect to network.
p If you have changed the password, re-enter the password on this
screen.
p When connecting to mopera U or mopera, you can leave the user
name and password fields blank.
12
Click “OK”.
The operation below explains how to carry out dial-up
connection using Windows
®
XP as an example. Perform
the operation shown on page 398 to connect the FOMA
phone to your personal computer.
p To perform a connection via packet communication, it is
recommended that you optimize the communication performance by
“W-TCP Setup” on page 412. By optimizing data, you can maximize
the high-speed communication capability in the FOMA network. To
execute the optimization, install the “FOMA PC setup software” (see
page 403).
p To perform a connection 64K data communication, do not optimize
by “W-TCP Setup”.
1
“ スタート (Start)” “ すべてのプログラム (All
programs)” “ アクセサリ (Accessories)”
“ 通信 (Communications)” Open “ ネット
ワーク接続 (Network connection)”.
2
Open the access point name to be used.
Select the icon of the ISP name (see page 419) you specify in
“Setting Dial-up Network”, then select “
ネットワークタスク
(Network task)”
→
“
この接続を開始する
(Start this connection)”.
Otherwise, double-click the icon of the access point name.
3
Confirm the contents and click “ ダイヤル
(Dial)”.
p
When connecting to mopera U or mopera, you can leave the user
name and password fields blank.
4
The display appears to indicate the
connecting state.
In this period, the system performs logon processing to confirm the
user name and password.
Connecting Dial-up